Watts Clever STC-4004 Advanced Instructions ** this document is work in progress **
This article applies to:
Current Cost - ENVI
Watts Clever - STC-4004 now discontinued
The above models of wireless energy monitors have introduced some differences to the original STC-4002 and CLASSIC models, In particular the XML like file output has changed and the frequency in which is delivered from the STC-4004\ENVI is significantly different. In my personal view these changes have not added any significant value to the product and in some cases are a real pain. In my view the earlier STC-4002\CLASSIC is my favourite device and has been more reliable when comparing both monitors side by side.
In this document I will start to detail the differences that will assist customers who have purchased the STC-4004 \ ENVI.
Serial to USB Cable
The STC-4004\ENVI Wireless Energy Monitor requires different port settings compared to earlier models.
As shown on the left the port settings required are:
- Port : This will be the port assigned in Windows Device Manager
- Baud Rate: This should be set to 57600 baud, any other baud rate will result in garbage or applications may hang or crash.
- Parity: This should be none.
- Stop Bits: One
- Data Bits: 8
Factory Reset
The following procedure will reset the STC-4004\ENVI to factory default settings, **Warning** this will reset everything including stored data and pairing details for the transmitter.
Hold down any 2 of the buttons when powering up the device and it will reset everything to factory defaults.
- Release held down buttons and cycle power off/on again.
- Configure your settings
- Pair with transmitter
Subscribe